Commercial Model Frame Cable Suspension Kit ONLY (up to 55'L Cage)
Used with: nCage Commercial Frame Kit
Accommodated Cage Size: Up to 55'L x 12' or 14'W
Overview: Hardware materials which allow netting to be suspended
by linear cables, creating professional appearance.
Standard Parts:
- (3) Rolls 1/4" Galvanized Steel Cable: 62'L each
- (6) Eye-bolts: 4" x 5/8" with washer & 2 nuts
- (3) Galvanized Turnbuckles: 9" x 1/2"
- (12) 1/4" Galvanized Cable Clamps
- (90) 1/4" Carabiner Steel Snaps, Zinc Plated
- *Add pulleys if net needs to slide frequently
*Optional Bridge Suspension System:
Reduces sag & expands height in center of cage on outside lines where
most weight is focused. Commonly used with 60'-70'L nets, smaller nets which
are heavier, and/or high-wind areas. If the Bridge System is not used with longer
or heavier nets, higher tension will need to be placed on the main linear lines
- consequently, we recommend using the Ground Auger System and/or Forward Kicker
Stabilizers, to compensate for the deflection created by the high tension. These
options are found on the main frame kit pages.
- (2) Rolls 1/8" Galvanized Steel Cable: 65'L each
- (4) Eye-bolts: 4" x 5/8" with washer & 2 nuts
- (2) Galvanized Turnbuckles: 6" x 3/8"
- (20) 1/8" Galvanized Cable Clamps
- *Requires minimum of 18" distance between top of net & top of frame poles
(e.g. if net height is 14', poles should be minimum of 15'6"L)
*Optional Base Anchor System:
Contains balls inside tunnel despite wind conditions. Also maximizes cage height
- 12" of net ground sag NO LONGER needed!
- (175) ft 1/8" Galvanized Cable
- (2) 1/8" Galvanized Cable Rolls: 16'L
- (2) Clamps with anchor points
- (4) Galvanized Turnbuckles: 6" x 3/8"
- (12) 1/8" Galvanized Cable Clamps
- (2) Bags of Hog-rings: 100 ct
- (1) Hog-Ring Pliers
- *Hog-rings create more flush fit, but do not allow net to slide -- request
"carabiner snaps" if net needs to slide.
- *Door on net required when 'base anchor kit' used.
