CurtainCage - Indoor Ceiling Cable Kit - Basic (55' cage or less)

Here is how the point system works:

• For every dollar you spend on our site, you get 3 points.
• You get 500 points simply for registering.
• For every approved product review you post, you get 500 points.
• Redeem 100 points for a dollar in savings. What's the bottom line? For every $33.33 you spend, you get $1.00 off your next order!

*Must register account to record points. Points earned from each order available for use after order ships.

Start earning free equipment today!

*Points will not accrue when special package Discounts are advanced to orders.

Basic-Grade Kit (no anchor hardware):

*For use with single lane (10'/12'/14'W) tunnel, 55'L or shorter

The Basic Kit is optimal for lighter-weight batting cage nets in combination with center vertical support points, or within a short gym distance i.e. #21 gauge netting over 60' or shorter span -- if spanning longer, additional vertical drop-points will be required. NO anchor hardware is included with the Basic Kit.

Our Ceiling CurtainCages include 3 linear cables which run just under your ceiling trusses. Vertical cables attach from the linear cables to the top of your tunnel. This allows the cables to slide like a curtain, from one end of your facility to the other.

Bottom-Line: The benefits of the Ceiling Cable System over the Wall Cable System is that it increases the height of the linear cables, opening up your area for other activities, i.e. long-toss, football, volleyball - or other activities that require open over-head space.

Parts List:

• (3) 60'L Rolls of 1/8" Aircraft Cable: Galvanized Coated (For horizontal attachment)
• (165) ft of 1/8" Aircraft Cable: Galvanized Coated (Enough for (33) 5' vertical drops every 5' for 55'L net)
• (3) 1.5" Eye Pulleys (To help cables slide smoother)
• (3) Turnbuckles: 9" x 1/2" Galvanized Steel (Installed on one end of each cable)
• (66) Steel Snap-hooks - Spring-loaded (For attaching cable to top of net & to linear cables)
• (72) 1/8" Cable Clamps (For securing ends of each cable)

-Cable cutting & crimping available for extra cost - see below for details.
-This model allows linear cables to be mounted at 16'H when used with 12'H net (1/8" cable can be upgraded to elevate linears)

Note: If you don't have solid anchor points, you can only put so much tension on your cable lines without reinforced anchors. Unless you have a very light-weight net, the result of this is either a large amount of sag, or pulling your eye-bolts out of the wall - or both. So if you don't have "back-side" wall access to mount a large anchor washer or plate, you may want to consider our Commercial or Pro Kits, which include Steel Mounting Plates.