Commercial-Grade Kit (for 55'L or less Single Lane Cage -- Block Wall
/ Poured Concrete mounting):
The Commercial Kit is optimal for heavier batting
cage nets spanning from wall to wall, upwards of 70'-80' without any center
drop-cable support points.
Our Ceiling CurtainCages include 3 linear cables which run just
under your ceiling trusses. Vertical cables attach from the linear cables to
the top of your tunnel. This allows the cables to slide like a curtain, from
one end of your facility to the other.
Bottom-Line: The benefits of the Ceiling Cable System over
the Wall Cable System is that it increases the height of the linear cables,
opening up your area for other activities, i.e. long-toss, football, volleyball
- or other activities that require open over-head space.
Parts List:
- (3) 60'L Rolls of 3/16" Aircraft Cable: Galvanized Coated (For horizontal
attachment)
- (275) ft of 1/8" Aircraft Cable: Galvanized Coated (Enough cable for (55)
5' vertical cables connecting to top of tunnel every 3' for 55'L cage)
- (15) Roller Wheels (To help cables slide smoother)
- (3) Turnbuckles: 9" x 1/2" Galvanized Steel (Installed on one end of each
cable)
- (6) Steel Wall Plates: 8" x 8" (spans plate across multiple blocks - prevents
need for back-side wall anchors)
- (110) Steel Snap-hooks - Spring-loaded (For attaching from cable to top
of net)
- (110) 1/8" Cable Clamps (For securing ends of vertical cables)
- (12) 3/16" Cable-Clamps: Galvanized Steel (For securing ends of each horizontal
cable in 2 places)
-This model allows linear cables to be mounted at 16'H when used with 12'H
net (1/8" cable can be upgraded to elevate linears)
Optional Add-on Items (select from "Related Items" tab):
- Cable cutting & crimping: Makes installation significantly
easier. Cable is cut to your specific vertical lengths, with both ends crimped
using professional crimping tool for tight seal. Creates precise & consistent
length, with no chance for cable slippage.
- Roller Wheels: Helps cables slide smoother, preventing
grooves from wearing in snaps, resulting in snags. The more used, the easier
it will slide.
- Adjustable mounting plates: Allows lines to adjust several
inches vertically after lags have been set. Very useful to compensate for
the sag over the years as the net relaxes.
- Lag Screws: Add to your kit to minimize trips to the hardware
store during installation. Or use your own lags based on the appropriate application.
4 per plate x 6 = 24 total lags required for a single lane CurtainCage.
- Truss Brackets: Custom designed to fit your ceiling trusses,
creating termination points for lines. Useful when your walls are too far
apart, or they can't handle the high tension loads.
