CurtainCage - Indoor Wall Cable Kit - Commercial (55' Cage Hardware Only w/5" Plates)

Commercial-Grade Kit (for 55'L or less Single Lane Cage -- Wood header mounting):

The Commercial Kit is optimal for heavier batting cage nets spanning between walls or trusses, without center drop-cable support points.

Our Wall CurtainCages include 3 linear cables which run the same height as your net. The cables attach to turn-buckles, which attach to eye-bolts or steel face plates, which anchor into your wall or structure (optional upgrade to truss/joist brackets available). Steel snaps attach the cable lines to the top of your tunnel, creating a "curtain effect" - allowing your tunnel to curtain to either side of your facility, "bungied" up against the wall, approximately 2-3' feet from the wall.

Bottom-Line: A Wall CurtainCage results in less overall sag and has more of a "boxy" look than a Ceiling CurtainCage, due to the net being attached directly to the linear cables every 2-3'. Just remember you will have 3 cables which run overhead at the same height as your net, unless you remove them each time. If you need to maximize your over-head space, you will want to consider a Ceiling CurtainCage or a Wind-Up Winch CurtainCage.

Base Parts List:

• (3) 60' Rolls of 3/16" Aircraft Cable: Galvanized Coated (Lengthwise attachment)
• (3) Turnbuckles: 9" x 1/2" Jaw-Jaw Galvanized Steel (One end of each cable)
• (12) 3/16" Cable-Clamps: Galvanized Steel (Secures cable ends)
• (6) Steel Wall Plates: 5" x 5" (Use with min of 2"x6" header - eliminates back-side anchors)
• (55) Steel Snap-hooks - Spring-loaded (Attaches 3 cables to top of net every 36" for 55' net)

Optional Add-on Items (select from "Related Items" tab):

• Roller Wheels: Helps cables slide smoother, preventing grooves from wearing in snaps, resulting in snags. The more used, the easier it will slide.
• Adjustable mounting plates: Allows lines to adjust several inches vertically after lags have been set. Very useful to compensate for the sag over the years as the net relaxes.
• 3" x 1/2" LDT Lag Screws: Add to your kit to minimize trips to the hardware store during installation. Or use your own lags based on the appropriate application. 4 per plate x 6 = 24 total lags required for a single lane CurtainCage.
• Additional Steel-Snaps: Add more snaps for a more flush fit to the cables. More attachment points = less sag. Consider adding enough snaps for connecting every 12"-24".
• Truss Brackets: Custom designed to fit your ceiling trusses, creating termination points for lines. Useful when your walls are too far apart, or they can't handle the high tension loads.

Redemption:

• Points are automatically credited after shipment of current order!
• During online check-out you will receive option to redeem points for instant discount.

How to Earn:

• Register account = 500 Points
• Every dollar spent = 3 Points
• Product review = 500 points
• Redeem 100 points for a dollar in savings.
• Bottom line: For every $33.33 spent, get $1.00 back!

Terms:

• No minimum or maximum order when redeeming points.
• Points CAN be used towards Shipping costs & taxes.
• Orders must be completely submitted online using registered account to qualify for earning and/or redeeming points.
• Points can not be "back-posted" after order has been placed.
• Points earned from each order are available for use after order ships.
• Points will not accrue when special package Discounts are advanced to orders.
• Points are not earned on Shipping costs or taxes.
• Points can not be redeemed for cash.
• PSI retains the right to decline use or revoke points at any time due to system glitches or unforeseen pricing changes.
• PSI has final authority on redemption items - we may offer substitute item for equal or greater value if requested item is out of stock or discontinued.

Start earning free equipment today!