CurtainCage - Indoor Wall Cable Kit - Commercial (55' Cage, Wood Mount)

Here is how the point system works:

• For every dollar you spend on our site, you get 3 points.
• You get 500 points simply for registering.
• For every approved product review you post, you get 500 points.
• Redeem 100 points for a dollar in savings. What's the bottom line? For every $33.33 you spend, you get $1.00 off your next order!

*Must register account to record points. Points earned from each order available for use after order ships.

Start earning free equipment today!

*Points will not accrue when special package Discounts are advanced to orders.

Commercial-Grade Kit (for 55'L or less Single Lane Cage -- Wood header mounting):

The Commercial Kit is optimal for heavier batting cage nets spanning from wall to wall, upwards of 70'-80' without any center drop-cable support points.

Our Wall CurtainCages include 3 linear cables which run the same height as your net. The cables attach to turn-buckles, which attach to eye-bolts or steel face plates, which anchor into your wall or structure. Steel snaps attach the cable lines to the top of your tunnel, creating a "curtain effect" - allowing your tunnel to curtain to either side of your facility, "bungied" up against the wall, approximately 2-3' feet from the wall.

Bottom-Line: A Wall CurtainCage results in less overall sag and has more of a "boxy" look than a Ceiling CurtainCage, due to the net being attached directly to the linear cables every 24". Just remember you will have 3 cables which run overhead at the same height as your net, unless you remove them each time. If you need to maximize your over-head space, you will want to consider a Ceiling CurtainCage or a Wind-Up Winch CurtainCage.

Parts List:

• (3) 60' Rolls of 1/4" Aircraft Cable: Galvanized Coated (Lengthwise attachment)
• (3) Turnbuckles: 9" x 1/2" Jaw-Jaw Galvanized Steel (One end of each cable)
• (12) 1/4" Cable-Clamps: Galvanized Steel (Secures cable ends)
• (12) 1.5" Premium Eye Pulleys (Helps cables slide smoother)
• (6) Steel Wall Plates: 5" x 5" (Use with min of 2"x6" header - eliminates back-side anchors)
• (24) 3" x 1/2" wood lags (4 per plate - disperses tension)
• (83) Steel Snap-hooks - Spring-loaded (Attaches 3 cables to top of net every 24" for 55' net)

1/4" Cable Specs: Wire Rope Material: Steel
Finish/Coating: Galvanized
Construction: 7x19 Strand Core
Diameter: 1/4"
Breaking Strength: 7,000 lbs.