CurtainCage - Indoor Ceiling Cable Kit - Pro (70'-95' Cage)

Here is how the point system works:

• For every dollar you spend on our site, you get 3 points.
• You get 500 points simply for registering.
• For every approved product review you post, you get 500 points.
• Redeem 100 points for a dollar in savings. What's the bottom line? For every $33.33 you spend, you get $1.00 off your next order!

*Must register account to record points. Points earned from each order available for use after order ships.

Start earning free equipment today!

*Points will not accrue when special package Discounts are advanced to orders.

Pro-Grade Kit (for 70'-95'L Single Lane Cage -- Concrete or Wood header mounting):

The Pro Kit is optimal for heavier batting cage nets spanning from wall to wall, upwards of 100' without any center drop-cable support points. This is the same system we use for our professional nationwide installations. It creates solid cable lines for optimal support, and results in professional looking tunnels. The adhesive combined with the extra durable 12"x12" steel plates (with 8 lag points to disperse the tension) also gives the additional stability to insure your plates are adhered tightly against your walls, mitigating safety risks.

Our Ceiling CurtainCages include 3 linear cables which run just under your ceiling trusses. Vertical cables attach from the linear cables to the top of your tunnel. This allows the cables to slide like a curtain, from one end of your facility to the other.

Bottom-Line: The benefits of the Ceiling Cable System over the Wall Cable System is that it increases the height of the linear cables, opening up your area for other activities, i.e. long-toss, football, volleyball - or other activities that require open over-head space.

Parts List:

• (3) 100'L Rolls of 1/4" Aircraft Cable: Galvanized Coated (For horizontal attachment)
• (1,050) ft of 1/8" Aircraft Cable: Galvanized Coated (Enough cable for (105) 10' vertical cables connecting to top of tunnel every 2' for 70'L cage)
• (30) 2" Eye Pulleys (To help cables slide smoother)
• (6) Turnbuckles: 9" x 5/8" Galvanized Steel (Installed on one end of each cable)
• (6) Steel Wall Plates: 12" x 12" (Mounts onto face of wall - prevents need for back-side wall anchors)
• (48) 3" x 1/2" mason or wood lags (4 per plate - disperses tension)
• (210) Steel Snap-hooks - Spring-loaded (For attaching from cable to top of net)
• (210) 1/8" Cable Clamps (For securing ends of vertical cables)
• (12) 1/4" Cable-Clamps: Galvanized Steel (For securing ends of each horizontal cable in 2 places)
• (1) Tube commercial-grade adhesive (extra reinforcement for back of plates)

-Cable cutting & crimping available for extra cost - see below for details.
-This model allows linear cables to be mounted at 16'H when used with 12'H net (1/8" cable can be upgraded to elevate linears)

1/4" Cable Specs: Wire Rope Material: Steel
Finish/Coating: Galvanized
Construction: 7x19 Strand Core
Diameter: 1/4"
Breaking Strength: 7,000 lbs.