CurtainCage - Indoor Ceiling Cable Kit - Commercial (60-70' Cage, Wood Mount)

Here is how the point system works:

• For every dollar you spend on our site, you get 3 points.
• You get 500 points simply for registering.
• For every approved product review you post, you get 500 points.
• Redeem 100 points for a dollar in savings. What's the bottom line? For every $33.33 you spend, you get $1.00 off your next order!

*Must register account to record points. Points earned from each order available for use after order ships.

Start earning free equipment today!

*Points will not accrue when special package Discounts are advanced to orders.

Commercial-Grade Kit (for 70'L Single Lane Cage -- Wood header mounting):

The Commercial Kit is optimal for heavier batting cage nets spanning from wall to wall, upwards of 70'-80' without any center drop-cable support points.

Our Ceiling CurtainCages include 3 linear cables which run just under your ceiling trusses. Vertical cables attach from the linear cables to the top of your tunnel. This allows the cables to slide like a curtain, from one end of your facility to the other.

Bottom-Line: The benefits of the Ceiling Cable System over the Wall Cable System is that it increases the height of the linear cables, opening up your area for other activities, i.e. long-toss, football, volleyball - or other activities that require open over-head space.

Parts List:

• (3) 80'L Rolls of 1/4" Aircraft Cable: Galvanized Coated (For horizontal attachment)
• (350) ft of 1/8" Aircraft Cable: Galvanized Coated (Enough cable for (70) 5' vertical cables connecting to top of tunnel every 3' for 70'L cage)
• (15) 1.5" Eye Pulleys (To help cables slide smoother)
• (3) Turnbuckles: 9" x 5/8" Galvanized Steel (Installed on one end of each cable)
• (6) Steel Wall Plates: 5" x 5" (spans plate across multiple blocks - prevents need for back-side wall anchors)
• (24) 3" x 1/2" WOOD lags (4 per plate - disperses tension)
• (140) Steel Snap-hooks - Spring-loaded (For attaching from cable to top of net)
• (140) 1/8" Cable Clamps (For securing ends of vertical cables)
• (12) 1/4" Cable-Clamps: Galvanized Steel (For securing ends of each horizontal cable in 2 places)

TIP: Turn-buckles can be difficult to tension to max load without certain tools/experience. Consider adding 3 turn-buckles to this kit (link below) which will make installation easier, and reduce the chance of requiring vertical drop cables to remove ceiling sag.

-Cable cutting & crimping available for extra cost - see below for details.
-This model allows linear cables to be mounted at 16'H when used with 12'H net (1/8" cable can be upgraded to elevate linears)

1/4" Cable Specs: Wire Rope Material: Steel
Finish/Coating: Galvanized
Construction: 7x19 Strand Core
Diameter: 1/4"
Breaking Strength: 7,000 lbs.